This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

The development of defoaming additives is steadily progressing and there are therefore always new and improved additives on the market. Some modern additives provide the desired defoaming effects by themselves, in contrasts to previous additives that needed to be used in combination with other additives. The task of this bachelors thesis was to evaluate the possibility of using these improved defoaming additives, with the aim to find alternatives that give the system better defoaming attributes while, at the same time, using less of the primary products. The tests were carried out in the coating type Teknocryl Aqua Combi 2780. The coating is a waterborne air drying acrylat-latex/alkyd based coating that can be used for both single coat painting and primer.

Problem: What attitudes do young adults have towards Functional food?Is there any relation between these attitudes and young adults behaviour towards Functional Food?Purpose: The purpose of our thesis is to understand young adults attitudes towards Functional Food and also examine the relation between these attitudes and their behaviour towards Functional Food. Method: The authors of this thesis have used a qualitative method for data collection, focus group interviews.  There were two focus groups interviews performed on high-school students at Alléskolan in Hallsberg. The interview questions and the analysis of the primary data have been based on the frame of reference. Conclusion: Our investigation shows similar results as previous studies about consumers attitudes towards Functional Food. Our respondents had mixed attitudes towards Functional Food.

Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of stainless steel to prevent corrosion from occurring.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

There are several different methods of assessment of functional communication in individuals with aphasia. However, these are not very established in Sweden. A number of assessment methods are not translated and adapted to Swedish. The views about what functional communication means are scattered. The purpose of this study was to, with the help of a questionnaire survey, identify how Swedish speech and language therapists assess functional communication, to what extent and what they want that an assessment method should contain to be clinically useful.The study involved 54 clinically active speech and language therapists in the area of aphasia.

Vi kom fram till att de svenska konsumenterna är mycket intresserade av functional foods och har en positiv inställning till produktgruppen men att bakgrunden till deras intresse skiljer sig åt. De livstilsorienterade konsumentgrupperna är primärt intresserade av produkternas emotionella egenskaper som smak, evig ungdom, bättre image, smalare midja och är mindre intresserade av produkternas kemiska sammansättning. Det produktorienterade konsumentgrupperna är däremot mer intresserade av varför produkterna är nyttiga och ser inte functional foods som ett redskap för att förbättra sin personliga image utan man är angelägen om kroppens fysiologiska välbefinnande. Det finns således avgränsade segment på den svenska marknaden som både är intresserade av functional foods men av olika anledningar. Sammantaget skapar detta en möjlighet för producenterna att differentiera sina positionerin mot olika kundgrupper.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

With my bachelorwork I aimed to design a new mobile ?livingspace? which should become as small, functional andeasy to assemble as possible.The ?living space?is made for people who are interested inhaving a biking vacation and getting more close to naturebut at the same time wish to have a comfortable and easyway of traveling and living. The ?living space? is a multipurposevehicle which you transport with a bicycle. Thevehicle contains a kitchen with workspace, a refridgerator,space for luggage and a comfortable sleeping space.In my workingprocess I made research, sketches and modelsto find a functional solution..

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

The aim of this study was to examine if it was possible to improve fitness and strength in young ice hockey players with help of a training programme based on functional training and aerobic training. The training programme was performed on Halmstad Hockey U-16 team where 17 boys participated in the study. We performed the training in a period of sex weeks with three training occasions each week. These consisted of two functional training sessions and one fitness session. In the beginning we emphasized the importance of a correct performance and technique.